Product description
3M™ Marine Adhesive Sealant Fast Cure 4200 White
A fast curing, one-part polyurethane that chemically reacts with moisture to deliver strong, flexible bonds to wood, gelcoat and fiberglass. It forms watertight, weather-resistant seals on joints and boat hardware above and below the waterline. In addition, its flexibility allows for dissipation of stress caused by shock, vibration, swelling or shrinking.
Features:
- Fast cure formula
- One component, moisture curing
- Allows for disassembly
- Bonds dissimilar materials
- Extended shelf life
- Adheres to a wide variety of substrates
- Non-sagging
- Permanently elastic
Applications:
3M™ Adhesive Sealant Fast Cure 4200 is designed to allow disassembly of wood and fiberglass parts bonded together. If a permanent bond is desired, use 3M™ Marine Adhesive Sealant 5200 or Marine Adhesive Sealant Fast Cure 5200.
Typical bonding applications include:
- Fiberglass deck to fiberglass hull
- Wood to fiberglass
- Portholes
- Deck fittings
- Moldings
- Trunk joints
- Between struts and planking
- Stern joints
Technical Data
Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes.
| Tack-Free Time @ 73°F and 50% RH | 1-2 Hours |
|---|---|
| Rate of Cure @ 73°F and 50% RH | 3/16" (4 mm) per 24 hour |
| Shore A Hardness (ASTM C661) | 40 |
| Tensile Strength (ASTM D412) | 180 psi (1.24 MPa) |
| Elongation at Break (ASTM D412) | > 400% |
| Service Temperature | -40°F - 190°F (-40°C - 88°C) |
| Density (lb/gal, appx.) | 9.75 |
| Consistency | Caulkable, non-sag paste |
| Solids Content (Appx.) | 100% |
Reviews
Recently Viewed
3M Products
3M 4200 Fast Cure White Adhesive Sealant 3oz Tube
C$25.95