A nylon fitting that fits directly on top of the Allen small cam cleat. The fairlead is specifically for stopping rope from leaving the cam cleat and ...More
A nylon fitting that fits directly on top of the Allen small cam cleat...
A nylon fitting that sits directly on top of the Allen medium cam cleat. The fairlead is specifically for stopping rope from leaving the cam cleat and...More
A nylon fitting that sits directly on top of the Allen medium cam clea...
Allenite is a material developed by Allen specifically for low weight and good heat dissipation to increase wear resistance over standard acetals. The...More
Allenite is a material developed by Allen specifically for low weight ...
Compact roller action camcleat for easy release of high performance controls and mainsheetsFeatures and BenefitsUltra compact low profile designDesign...More
Compact roller action camcleat for easy release of high performance co...
A broken spring is usually the reason for a cleat failure. The Harken Cleat Spring replaces the spring in all standard size Harken cleats (150, 365, a...More
A broken spring is usually the reason for a cleat failure. The Harken ...
Multiple rows of high-load ball bearings and precise V-shape reduce friction, allowing Harken cam cleats to activate with the snap of the wrist. No ne...More
Multiple rows of high-load ball bearings and precise V-shape reduce fr...
X-Treme Angle FairleadThe X-Treme Angle Fairlead uses low-friction stainless steel line guides on the exit side of the cleat. This allows crew to rele...More
The cam mounting bracket attaches the Trigger Cleat to 76mm (3.00in) low-profile triple blocks with existing cam cleats. It fits the 152 and 411 Heig...More
The cam mounting bracket attaches the Trigger Cleat to 76mm (3.00in) l...
Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. H...More
Wedge kits and risers are available to improve the angle of your cams....
Harken Delrin Ball Bearing Kit for Harken 150 Cam-Matic CleatBall BearingsDelrin ball bearings are made of a composite material well-suited for low- t...More
The Fast Entry Cam Cleat features Die Cast Aluminum Cams, Delrin(tm) Ball Bearings, Computer Designed High Flare allows for easy entry at various angl...More
The Fast Entry Cam Cleat features Die Cast Aluminum Cams, Delrin(tm) B...
Easily fitted to the small T-Cleat and C-Cleat. Allows precise cleating and release from any lead angle. Lower entry efforts for off-centre cleating. ...More
Easily fitted to the small T-Cleat and C-Cleat. Allows precise cleatin...
Wedges are stackable for greater angles or to act as a riser.Stack wedges to raise height of cleats or to correct mounting alignment at 11, 22, 33 deg...More
Wedges are stackable for greater angles or to act as a riser.Stack wed...
Fairlead mounts under the cleat and is held in place by the cleat fasteners. Allows a higher angle of cleating.Works with Ronstan medioun C-Cleat and ...More
Fairlead mounts under the cleat and is held in place by the cleat fast...
